MARK V 510 to MARK 7 Pro Fence Upgrade (for units made in 1986 or later) PART #555982

Move Up Your MARK V 510 to The MARK 7 Pro Fence and Table System and Do Everything the Professional Do!

$479.99

-
+

-

(0 Customer Reviews)

This Pro Fence System has been engineered to give you even better control, precision and quality performance than you’ve come to expect from your MARK V 510. The professional-duty Self-Aligning, Pro Fence System features two interchangeable stainless steel scales for direct-reading of rip cut widths, plus twin locking levers, first one for the infeed end of the fence and the second for the outfeed end to ensure a positive, precise fence lock-down, even when working with large and/or heavy workpieces. Your new Rip Fence drops straight down onto the fence rails without tipping or fiddling, then slides easily and precisely along the rails on high-tech glides.

LEARN MORE
Mark V Model 510 to MARK 7 Pro Fence and Table System Upgrade
  • Larger Rip Fence is 24-1/2″ long x 2-1/2″ thick with four T-slot tracks
  • Direct-Reading, Magnetic, Stainless Steel, Rip Fence Scales One 45″ and one 38-1/2″ long.
  • 2-1/2” Wide Fence Straddler
  • (6) New Extruded Fence Rails (2) for Main Worktble. (4) for Extension tables
  • All required fittings and hardware
  • Instruction Manual
  • Special Set-Up and Alignment Gauge
LEARN MORE

The Can't Miss Details

Add a More Versatile Rip Fence for Improved Results and Direct-Reading Scales for Greater Accuracy!

This Pro Fence System has been engineered to give you even better control, precision and quality performance than you've come to expect from your MARK V 510. The professional-duty Self-Aligning, Pro Fence System features two interchangeable stainless steel scales for direct-reading of rip cut widths, plus twin locking levers, first one for the infeed end of the fence and the second for the outfeed end to ensure a positive, precise fence lock-down, even when working with large and/or heavy workpieces. Your new Rip Fence drops straight down onto the fence rails without tipping or fiddling, then slides easily and precisely along the rails on high-tech glides.

Plus - the fence is easier to square-up than a 510 fence (the alignment screws are easily accessible on the top of the Rip Fence) and the 520 floating tables feature a 3-point locking system to ensure that your fence is always parallel to the blade, unlike the single-point locking system on the Model 510 floating tables.

Your New Rip Fence adds three more heavy-duty T-slots (two on the top and one on each face for attaching even more jigs & fixtures) to your machine. Plus, two new Fence Rails for the Main Work Table, two new Fence Rails for the Fixed Extension Table and four new Fence Rails for your two Floating Tables, plus all the required Rail Mounting hardware and a special-built Set-Up and Alignment Gauge. Also included is the new, wider Fence Straddler that slides easily on your new wider Rip fence for cutting narrow workpieces. And finally a comprehensive Owner’s Manual.

Here's What's Included:
• Larger Rip Fence is 24-1/2" long x 2-1/2" thick with dual T-slot tracks on the top surface and a T-slot track on each face for mounting accessories such as: rip fence mounted feather board, T-track utility light kit, flip-up rip fence stop
• Direct-Reading Rip Fence Scales let you set rip cut dimensions in an instant without measurement. Includes two magnetic, stainless steel scales, one 45" long with a zero-point 6-1/2" from the left end and 38-1/2" from the right end - and a second scale 16" long with a zero-point 6-1/2" from the left end and 9-1/2" from the right end.
• Wider Fence Straddler to accommodate the 2-1/2” wide Rip Fence
• (6) New Extruded Fence Rails for main and extension tables
• All required fittings and hardware
• Instruction Manual fully describing alignment, maintenance, safety, tips and techniques.
• Special Set-Up and Alignment Gauge

Increase Your MARK s Outboard Support When Ripping Large Panels Or Cross-Cutting Long Boards by Adding 5-Foot Connector Tubes

Just slip these extra-long tubes into the rails of your MARK ’s (for All MARKs except MARK V 500 unless Upgraded) main table or extension table to get all the added support you need for sawing, drilling, sanding, shaping or performing virtually any operation with extra large or long workpieces. Your existing telescoping legs and floating extension tables also work with these tubes.

Note: Not compatible with Model 500 Mark Vs unless it has been Upgraded.
Part NumberNameSpecifications
555982MARK V 510 to MARK 7 Pro Fence Upgrade (for units made in 1986 or later)• Larger Rip Fence is 24-1/2" long x 2-1/2" thick with four T-slot tracks
• Direct-Reading, Magnetic, Stainless Steel, Rip Fence Scales One 45" and one 38-1/2" long.
• 2-1/2” Wide Fence Straddler
• (6) New Extruded Fence Rails (2) for Main Worktble. (4) for Extension tables
• All required fittings and hardware
• Instruction Manual
• Special Set-Up and Alignment Gauge

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. $25 Shipping Surcharge View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
MARK V 510 to MARK 7 Pro Fence Upgrade (for units made in 1986 or later) 555982

$479.99Add to cart